Model : µFlameCal5 | Make : ANALAB | HSN Code : 90275010

Technical Specification

• Element Range: Na, K, & Li: 1-200 ppm, Ca: 15-300 ppm, Ba: 30-3000 ppm
• Sensitivity: Na: 0.5 ppm, K: 0.5 ppm, Li: 0.5 ppm, Ca: 15 ppm, Ba: 50 ppm
• Filter Selection: Automatic by soft touch key
• Resolution: 0.1 ppm
• Detector: Silicon Photodiode
• Linearity: Better than 2%
• Unit of Measurement: ppm
• Calculation of Concentration: In built with system & can be measured by Sample Weight & Dilution Factor.
• Reproducibility: <1% Coefficient of Variation (CV) for 20 consecutive samples using 10 ppm Na set as maximum standard & Barium 3% Coefficient of Variation (CV) for 20 consecutive samples of Concentrations between 50 to 199 ppm.
• Stability: <2% drift over 5min when continuously aspirating 10 ppm sample. Specificity Interference from Na/K and Li.
• Curve Fitting Accuracy: <1% error when 3 ppm Na/K and 5 ppm Li are set as maximum standards and can measure calculation of curve coefficient automatically.
• Correlation Factor: Possible with System
• Quick Calibration Facility: With Highest standard
• Calibration: Upto 05 standards per Elements with Curve Fitting Software in-built with Instrument. (Automatic calculation of curve coefficient)
• Measurement of Sample: Multi elements in single aspiration OR one by one.
• Ignition System: Auto Igniter
• Flame Type: LPG & Dry Oil Free Air
• Auto LPG Shut-off at Power Off: Safety feature in case of sudden power failure.
• Auto Flame ON / OFF Detection: Audio and Visual Alarm
• Gas Control: Adjustable with Regulator
• Atomizer: Axial Flow Type
• Air Flow Monitoring Facility: 4 – 6 ml/min., In-built with Instrument
• Error Messages: “LPG is Off”, “Home Detection”, “Memory Full”, “Flame is Off”, “Value Out of Limit”, “Do Warm-up”, “In Correct Standard” & “Enter in Range”.
• Display: 20 x 4 Line Alphanumeric LCD with Backlit
• Keypad: Membrane waterproof polycarbonate soft touch keypad compliance to UL/ROHS
• Air Supply Unit (Separate Unit): Consist of Air Compressor, Pressure Gauge, Pressure Regulator, Moisture Filter, PU Tube (2 Meters) and Air filter with moisture absorbent catalyst.
• Calibration Data Storage: Non-Volatile Memory which can store, print & view report date & time, company name, calibration date & time, calibration done by, standards results, instrument ID, instrument serial number, instrument ID etc.
• Analysis Data Storage: More than 750 analysis data can be stored with corresponding information such as date & time, record number, Batch number / ID, sample name, sample number, assigned batch number, Corresponding Calibration data of lower & higher standards, assigned dilution factor, Sample Weight, Calculation of Concentration, concentration unit, instrument number, make etc. Secondly, analysis data can be searched by:
• Batch number
• Sample number
• Instrument number
• Both number
• Date
• Date range
• Scrolling
• Password Protection: Data is password protected
• Reporting: With record number, batch number, date, calibration mode & stored analysis data.
• Printer Interface: Centronics Parallel / Serial (RS-232 C) Port