-
Conductivity Meter/PH Meter
Supplied with Combination Glass pH Electrode (0-70ºC), Standard Buffer Tablets (7.00 pH, 4.01 pH & 9.18 pH), Electrode Stand consists of Clamp, Base Plate & Rod, Dust Cover, In-built Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Ultrasonic Bath Device
Supplied with Lid, Basket, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Microcontroller Based Karl Fischer Titrator
Supplied with 250ml Reaction Vessel, Dual Platinum Combined Electrode, Teflon Paddle, Teflon Assembly, Moisture Trap (02 Nos.), 250ml Amber Reservoir Bottle, Dispensing Tube (02 Nos.), Micro tip (02 Nos.) Teflon Tube for Dispensing Path, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Auto Titrator
Supply with Combination Glass pH Electrode, Temperature Probe, pH Buffer (4.01, 7.00, 10.01), Beaker – 06 Nos., Push rod tool, Burette valve system 10mL, Stirrer Paddle – 03 Nos., Electrode holder system, Tubing 3.2 × 0.5 Dia – 02 Nos., Nut – 03 Nos., Glass bottle (1000 mL), Moisture Trap, Fuse – 02 Nos., USB Cable, Power Code, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Choice™ PTFE (Hydrophobic) Syringe Filters
Use Thermo Scientific™ Choice™ PTFE Hydrophobic Syringe Filters for filtration of aggressive organic, highly basic or hot solutions and as transducer protectors. They can filter aqueous solutions after pre-wetting with an alcohol. These syringe filters provide cleaner sample extracts by removing interfering materials and fine particles down to the rated pore size.
Adding a syringe filtration step prior to chromatographic injection not only helps to ensure more consistent and reliable results, it also helps to protect instruments and prolong column life. Economic Choice Syringe Filters are available in a variety of sizes and membrane types to meet any application need.
-
Model : µFlameCal5 | Make : ANALAB | HSN Code : 90275010
Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Model : µFlameCal10 | Make : ANALAB | HSN Code : 90275010
Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Model : µFlameCal50 | Make : ANALAB | HSN Code : 90275010
Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Microcontroller Based Melting/Boiling Point Apparatus – Model : ThermoCal10
Supplied with 250ml Beaker, Teflon Lid, Tubular Heater, RTD Sensor, Silicon Oil (200g Bottle), Melting Capillary One End Sealed (Pack of 100 Nos.), Boiling Tube, Teflon Coated Magnetic Paddle, Sample Tapping Rod, Two Melting Standards 49ºC and 238ºC Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Multiparameter Analyzer (pH/ORP/Conductivity/TDS/Resistivity/Salinity/C) – Model : MultiCal50
The MultiCal50 is an advanced, high-precision multiparameter analyser designed for simultaneous measurement of critical water quality parameters. Ideal for laboratories, industrial applications, and field use, this versatile instrument delivers fast, reliable results with easy calibration and user-friendly operation.
-
Bath InDrycubator 352
Dry Bath Incubator model 352 is a microcontroller based instrument designed to control the heating of thermally conducting block. The block is fabricated to fit in 24 test tubes of 12mm dia. The test tubes contact the walls of the block to provide constant precise temperatures to the test tubes contents. The output of the heater is controlled by means of a precision temperature sensor and highly sensitive automatic electronic temperature controller.
-
Haemoglobin Meter 1315
Microprocessor Haemoglobin Meter – 1315 is used to determine the haemoglobin concentration in the blood sample. The measurement haemoglobin concentration is carried out at wavelength of 546 nm. Using state-of-the-art LED technology the green light produced is projected through the sample and measured by sensitive photodiode. The measurements are made using cyanmethemoglobin method used through the world.Heamoglobin is an iron-containing protein found in the red blood cells. It enables the red cells, to carry oxygen from lungs to the rest of the body and carry carbon dioxide back. The haemoglobin level indicates the blood’s oxygen-carrying capacity and can play a major role in the early diagnosis of many illnesses such as thelsemia, sickle cell anemia, leukemia, malaria and hook worm etc.
-
Differential Blood Cell Counter 368
Differential Blood Cell Counter Model-368 use microprocessor controlled system which offers accurate and quick differential counts. This cell counter is featured with reliability, accuracy, stabilityand is a sleek device. These cell counters are available with 11 operating keys that are suitable for clinical labs for showing the primary bacterial or virus infections.
-
ANALAB Flame Photometer
Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Analab Multiparameter Analyzer
Supplied with Combination Glass pH Electrode (0-70ºC), Conductivity Cell K=1.0, Standard Buffer Tablets, Temperature Probe, Electrode Stand consists of Clamp, Base Plate & Rod, Dust Cover, DC Adaptor, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
TDS Conductivity Meter
Supplied with Conductivity Cell K = 1.0, Temperature Probe, Electrode Stand consists of Clamp, Base Plate & Rod, Dust Cover, DC Adaptor, Instruction & Operational Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Multiparameter Model TMULTI37
OSHCON-TOSHNIWAL Digital series CL46+ Deluxe pH/Redox benchtop meter is eco- friendly, designed to measure pH and ORP with stable high input impedance amplifier to achieve high accuracy & quick response.
