-
Medico Plus Centrifug
The most popular model is now available with brushless motor, door safety interlock, digital speed indicator and timer. Ideal for routine centrifuging requirements of medical practitioners, diagnostic laboratories and hospitals.
-
Cyclomixers / Vortex Mixers
- Designed for mixing liquids in Schools, Laboratories & Factories
- Touch/ Continuous Operation mode Selection through bi-directional Switch
- Speed Regulation through knob provided on the control panel
- Interchangeable mixing heads for use with variety of tubes
- Supplied with all interchangeable mixing heads
-
Digital Water Bath ( CONCENTRIC RING )
- Double walled construction.
- Fully made of Stainless Steel 304.
- Inner mirror finished & exterior matt finished.
- Gap between the two walls filled with glass wool insulation to avoid heat loss.
- Heating is by specially designed immersion type water heaters.
- Microprocessor based Auto Tune PID Digital Temperature Controller.
- Simplex A class transition joint PT 100 sensor.
- Lid is supplied with 6 holes of 7.5 cm dia.
- Supplied with concentric ring.
- Temperature Range : 40.0 C to 100.0 C
- Control Accuracy : +-0.5C
- Temperature Resolution : 0.1C
-
Laboratory Hot Air Oven
- Exterior made of Galvanized sheets powder coated.
- Gap between the two walls filled with glass wool insulation.
- Fully insulated door with brass lock hinges.
- Heating is by specially designed energy efficient Air heaters fitted at bottom.
- Supplied with GI shelves & Aluminum ventilator.
- Micro processor based Auto Tune PID Digital temperature controller.
- Simplex A class transition joint PT 100 sensor.
- Temperature Range : 50.0 deg C to 250.0 deg C
- Temp Resolution :0.1deg C
- Control Accuracy :+-2.0 deg C or better.
-
Conductivity Cell cc1,cc,2,cc3
- Conductivity sensor measures the ability of a solution to conduct an electrical current
- Presence of ions in a solution allows the solution to be conductive
- Higher ion concentration results in higher conductivity
- The same electrode can also be used to measure Resistivity, TDS, and Salinity of aqueous solutions (if supported by the meter)
- Conductivity sensor selection should match the measuring range of the solution for accurate results
-
Touchscreen Automatic Digital Polarimeter ADP45
The polarimeter is an instrument used for determining the Optical rotation of substances. In this way, the concentration, content, purity, etc of certain substances can be find out. Therefore, the polarimeter has become one of the most useful instruments in laboratories of sugar industry, pharmaceutical industry, oil refining, foodstuff industry, chemical industry, universities and scientific research field.
-
Touchscreen ABBE refractometer LMAR1317T
This instrument can widely be used in petroleum, chemical, pharmaceucaI, sugar refining and food industries, as well as in related colleges, universies and scienfic research instuons for measuring refracve index nD of transparent, semi transparent liquid. This instrument can also be used to measure the Brix (BX) of the sugar soluon, and correct the effect of temperature on the Brix automacally. In addion, this instrument can also display the temperature of the sample.
-
Model : µFlameCal50 | Make : ANALAB | HSN Code : 90275010
Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Model : µFlameCal10 | Make : ANALAB | HSN Code : 90275010
Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Model : µFlameCal5 | Make : ANALAB | HSN Code : 90275010
Supplied with Two Filters (Na and K), Air Supply Unit, Atomizer Tube, Sample Beaker (06 Nos.), Gas Lighter, LPG Tube, Power Cord, Operational & Instruction Manual with SOP, Calibration Test Certificate (Without Traceability Document) and Warranty Card.
-
Remi Stability Chambers
REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.
-
High Permonace Laboratory refrigerator
REMI RLR series are laboratory refrigerators, specially designed for storage of temperature sensitive reagents, kits, & samples, REMI RLR meets requirement of Pharmacies & laboratories, i.e.;
Pathology, Biochemistry, Hematology, Microbiology and Serology, Genetics & Diagnostics. -
Deep Freezers
REMI Deep Freezers are designed for storage of biological samples in biotech, life science, clinical research as well as medical & pharmaceutical specimens, serums, vaccines, blood components. These freezers are available with temperatures up to -20°C and – 40°C.
These freezers are available in standard & GMPversions. -
MSI 86 – Dry Bath
The Metalab Dry Bath is a compact, thermostatically controlled heating device designed for precise temperature incubation of samples in test tubes, microtubes, or vials. Ideal for molecular biology, clinical, and biochemical labs, it ensures uniform heating and consistent performance.
-
MSI 85 – Ultra Violet Fluorescence Viewing Cabinet
The MSI 85 UV Fluorescence Viewing Cabinet is a compact, self-contained unit designed for safe and efficient observation of fluorescent materials under ultraviolet light. Ideal for laboratory applications such as gel electrophoresis analysis, mineral studies, and quality control, it provides high-intensity UV illumination in a shielded enclosure for optimal fluorescence visibility and user protection.
-
MSI 84 – C O D Digester
Used to analyze the chemical oxygen demand (COD) in industrial wastewater, sewage water and other effluents.
-
MSI 79 – Rotary Shaker
The MSI 79 Rotary Shaker by Metalab is a compact and efficient benchtop device designed for uniform mixing and agitation of samples in laboratories. It provides smooth rotary motion and is ideal for mixing solutions in flasks, bottles, or test tubes under controlled conditions.
-
MSI 87A – S S Petri Dish Box with Handle
The MSI 87A S.S. Petri Dish Box with Handle from Metalab is a high-quality stainless steel container designed for safe storage, sterilization, and transport of Petri dishes. It features a sturdy handle for easy handling and is ideal for use in microbiology labs and sterilization units due to its corrosion-resistant and autoclavable construction.
